Modelo
Jensen DUBW10
Avaliação
DIAM
10"
FS(Hz)
30.4
VAS(l)
37.94
QTS
0.56
PWR(W)
1000
SPL(dB)
86.5
IMP(Ohm)
4x1
DISP
PROD
+156 P-Bass
30 Aug 2020, 20:19
Gabinete
Duto
User needs help. Can you help?
Can you explain the height, width, and length of the port?
Can you please explain the height, width, and length of the port? I have changed the height of the port to different numbers but the 3d rendering does not show any changes. I don't understand. When I go to view the parts, none of the dimension change. What part of the port does height and width signify?
Descrição
This is my demo-project for this woofer. I simulated 6 pieces of buildable, and relatively compact boxes using stock parameters from local database. My rules: the most possible linear and / or widerange amp. resp. at 60Hz/12dB cabin gain, ideal power handling down to lower 20ish Hzs or lower, low vent air velocity, acceptable group delay down to 20 Hz or lower. On 3D is that box which perfectly matches my rules with acceptable group delay at any Hz, and +7.5 dB in amp. resp. between 22 and 38 Hz.