Dayton Audio DCS165-4
Dayton Audio DCS165-4
Model

Dayton Audio DCS165-4

Rating
DIAM
7"
FS(Hz)
35.7
VAS(l)
12.1
QTS
0.34
PWR(W)
200
SPL(dB)
83.7
IMP(Ohm)
4x1
avb
UNK

+0 warren-34090

24 Jun, 23:37

Description

Not Specified

Enclosure

Vented, Vb: 12.6l, Fb: 48.9Hz

+0 Maxwellmaybury

15 Oct 2020, 23:52

Description

Sub

Enclosure

Vented, Vb: 26.1l, Fb: 35.9Hz

+142 vpeti89

18 Oct 2020, 12:32

Description

This is a relatively compact vented box for this woofer's stock parameters from local database. This woofer in this box on RMS power reaches but not overpasses Xmax at higher frequencies like Fb, have ideal RMS power control down to 20 (19) Hz, have less than 10 m/s vent air velocity up from 20 (19) Hz, have low (acceptable) group delay at every frequency, and it is louder at every frequency compared to any sealed box optimised for this woofer to have ideal RMS power control down to 10, or 20 Hz.

Enclosure

Vented, Vb: 5.2l, Fb: 23.6Hz

+142 vpeti89

18 Oct 2020, 13:20

Description

This is a relatively compact 6th order bandpass box for this woofer's stock parameters from local database which have the low-chamber tuned to Fb=20Hz. It have acceptable group delay up from 20Hz: less than the half of the actual Hz's time in miliseconds for each Hz, then ideal RMS power handling down to way under 20Hz + above 20Hz reaches but not overpasses Xmax, at 60Hz/12dB cabin gain: no 2 peaks, and the -3dB point in amp resp. curve is at 100+Hz (very widerange sounding in a small car).

Enclosure

BP6, Vbfront: 8.2l, Fbfront: 20Hz, Vbrear: 2.4l, Fbrear: 322.1Hz