Model
DLD ACOUSTICS DLD 500+PRO
Rating
DIAM
12"
FS(Hz)
37.4
VAS(l)
35
QTS
0.44
PWR(W)
1000
SPL(dB)
87.7
IMP(Ohm)
4x1
avb
PROD
+156 P-Bass
9 Oct 2020, 18:03
Enclosure
Vented
Can you please explain the height, width, and length of the port? I have changed the height of the port to different numbers but the 3d rendering does not show any changes. I don't understand. When I go to view the parts, none of the dimension change. What part of the port does height and width signify?
Description
In this project I created a relatively compact vented box for this woofer - using it's stock parameters from local database. My rules and needs: on RMS power at higher frequencies than Fb reach but not overpass Xmax, then at every frequency down to 20 (19) Hz: ideal RMS power handling, low vent air velocity, and acceptable group delay. This gives 101+ dB SPL even at 20 Hz WITHOUT cabin gain. The woofer's dimensions were not present, but in my opinion the best place for the woofer is on left side.