Model
JBL S2-1024-4
Rating
DIAM
FS(Hz)
VAS(l)
QTS
PWR(W)
SPL(dB)
IMP(Ohm)
avb
+0 alex-19601
18 Mar 2023, 09:19
Enclosure
Vented
+0 topcat3355
4 Apr 2020, 12:19
Description
Not Specified
Enclosure
Vented
+156 P-Bass
8 Dec 2019, 16:16
Description
My personal needs: not overpass the Xmax at 20 Hz and above in a ported box. I find out that theres no way to create such a box using the stock Pe with the woofer's basket inside, just with the RMS power. I simulated 3 ported boxes using 1x stock Pe, 2x RMS power, the recomended box (stock Pe and RMS power), and a box in WinISD with RMS power, this is on 3D, this will sound the most natural, but the other boxes are much simple and a bit compact. For other Vb/Fb see the Graphs History to try design them.
Enclosure
Vented
+156 P-Bass
8 Dec 2019, 21:59
Description
I have simulated the boxes from my previous project: the woofer's RMS powered ported boxes with 9.3 and 9 mm cone displacement at 20 Hz and above, the WinISD box, and the recomended box. Then I find out that in JBL's recomended ported box the woofer overpasses Xmax around 25-26 Hz, but in JBL's recomended sealed box the cone displacement is 7.3 mm, so I decided to design a ported box for 7.3 mm cone displacement at 20 Hz and above - in all aspects it is very similar to WinISD box, it is on 3D.
Enclosure
Vented
+27 Hebro
18 Mar 2019, 15:30
Description
Not Specified
Enclosure
Vented
+27 Hebro
4 Mar 2019, 19:47
Description
Not Specified
Enclosure
Vented
Description
Not Specified