Model
CT Sounds TROPO 10 D4
Rating
DIAM
10"
FS(Hz)
40.8
VAS(l)
13.7
QTS
0.5
PWR(W)
900
SPL(dB)
83.9
IMP(Ohm)
4x2
avb
PROD
+156 P-Bass
26 Dec 2022, 00:12
Some parameters of the speaker used for this project differ from the stored in the database.
Enclosure
Vented, Vb: 67l, Fb: 21.6Hz
+156 P-Bass
26 Dec 2022, 00:38
Some parameters of the speaker used for this project differ from the stored in the database.
Description
A windy C-slot-ported box for Tropo 10, QL = 10, because that QL is less common like 7, but still possible, and it gives smaller Vb - which is more safe like if I was optimising Vb and Fb with QL = 7 for maximising the potential and RMS power handling ability. Parameters I recalculated using SBL / BB6 / WinISD, base parameters I copied from Parker The Bassheads's video on yt: https://youtu.be/HhFBErGLmfc . Watch out, high vent air velocity - need to round over properly the port's edges.
Enclosure
Vented, Vb: 33.5l, Fb: 21.6Hz
Description
A windy C-slot-ported box for 2 Tropo 10s, QL = 10, because that QL is less common like 7, but still possible, and it gives smaller Vb - which is more safe like if I was optimising Vb and Fb with QL = 7 for maximising the potential and RMS power handling ability. Parameters I recalculated using SBL / BB6 / WinISD, base parameters I copied from Parker The Bassheads's video on yt: https://youtu.be/HhFBErGLmfc . Watch out, high vent air velocity - need to round over properly the port's edges.